Templates: 2H45

2H81 – Two Knuckle Bearing Hinge

HEAVY WEIGHT: 4.5″ x 4.0″ or 4.5″ x 4.5″

GENERAL PRODUCT INFORMATION: PBB, Inc. template hinges are manufactured to close tolerances and meet all specifications and requirements set by the American National Standards Institute (ANSI).

  • For heavy weight doors receiving high frequency service.
  • Secure: Door cannot be lifted off when in closed position
  • Concealed Delrin bearing takes both vertical and lateral loads
  • Handing of hinge is required
  • All hinges are ANSI template.

HINGE SWAGING: A standard swaging of our standard weight full mortise hinge when closed to parallel position provides a 1/16” clearance between leaves.

2H81: Available Materials

2H81 (ANSI A8111)
Steel-Polished and Plated or Bonderized and Prime Coated for Painting

2H51 (ANSI A5111)
Stainless Steel-Polished and Satin Finish

2H81: Product Specifications

MATERIAL GAUGE:
.180 ± .005 for 4-1/2” x 4”
.180 ± .005 for 4-1/2” x 4-1/2”
HEIGHT:
4.50 (+.000/-.015) for 4-1/2” x 4”
4.50 (+.000/-.015) for 4 1/2” x 4-1/2”
WIDTH:
4.00 ± .015 for 4-1/2” x 4”
4.50 ± .015 for 4-1/2” x 4-1/2”
4.5” STANDARD SCREW SIZE
FHMS – 12-24 x 1/2”
FHWS – 12 x 1-1/4”

PACKAGING INFORMATION:
One hinge per plastic bag, 3 hinges and 1 screw pack per unit carton.
16 unit carton or 48 hinges per master shipping carton.
1 screw pack includes all machine screws (24), and 1/2 wood screws (12). ATMS & AWS also available.