Templates: 2B45

2P81 – Two Knuckle Plain Bearing Hinge

Standard Weight: 4.5″ x 4″ or 4.5″ x 4.5″

PBB, Inc. template hinges are manufactured to close tolerances and meet all specifications and requirements set by the American National Standards Institute (ANSI).

  • For use on medium weight doors or doors requiring low frequency service.
  • Not for use with door closer.
  • Secure: Door cannot be lifted off when in closed position.
  • Vertical load taken by nylon washer
  • Handing of hinge is required.
  • All hinges are ANSI template
HINGE SWAGING: Standard swaging of our standard weight full mortise hinge when closed to parallel position provides a 1/16” clearance between leaves.

2P81: Available Materials

2P81 (ANSI A8133)
Steel-Polished and Plated or Bonderized and Prime Coated for Painting

2P51 (ANSI A5133)
Stainless Steel-Polished and Satin Finish

2P81: Product Specifications

MATERIAL GAUGE:

.134 ± .005 for 4-1/2” x 4”
.134 ± .005 for 4-1/2” x 4-1/2”

HEIGHT OF HINGE:

4.50 (+.000/-.015) for 4-1/2” x 4”
4.50 (+.000/-.015) for 4-1/2” x 4-1/2”

WIDTH:

4.00 ± .015 for 4-1/2” x 4”
4.50 ± .015 for 4-1/2” x 4-1/2”

4.5” STANDARD SCREW SIZE

FHMS – 12-24 x 1/2”
FHWS – 12 x 1-1/4”

PACKAGING INFORMATION:
One hinge per plastic bag, 3 hinges and 1 screw pack per unit carton.
16 unit carton or 48 hinges per master shipping carton.
1 screw pack includes all machine screws (24), and 1/2 wood screws (12). ATMS & AWS also available.