Templates: BB8540 | BB8545

BB85 – Flush Ball Bearing Pivot Hinge

Standard Weight: 4″ or 4.5″

PBB, Inc. template hinges are manufactured to close tolerances and meet all specifications and requirements set by the American National Standards Institute (ANSI).

A simple solution to the problem of loose screws, distorted hinge leaves, pulled open knuckles caused by heavy vibration, door slamming or excessive use.

The shock comes first to the reinforcing hinge and is transmitted to all bearing surfaces of the frame.

  • Handed
  • Non Reversable
  • 2 Knuckles
  • Fixed Pin
  • All Pivots are Standard Template
NOTE: Specify left or right hand
Available Option: Leaves can be beveled for better appearance and easier cleaning.

BB85: Available Materials

BB85
Steel-Polished and Plated or Bonderized and Prime Coated for Painting
BB55
Stainless Steel-Polished and Satin Finish

BB85: Product Specifications

MATERIAL GAUGE:
.180 ± .005
WIDTH:
Width of hinges used on the door must be specified when ordering as follows:

• With 4” x 4”, 4 1/2” x 4” or 5” x 4” hinges
Specify: BB8540 for steel, BB5540 for stainless steel

• With 4 1/2” x 4 1/2”, 5” x 4 1/2”, or 6” x 4 1/2” hinges
Specify: BB8545 for steel, BB5545 for stainless steel

STANDARD SCREW SIZE
GROMMET NUT & OHMS – 1/4-20 x 2”
JACKNUT & OHMS – 1/4-20 x 1”
FHWS – 14 x 1-1/4”
PACKAGING INFORMATION:
One pivot per plastic bag, 1 pivot and 1 screw pack per unit carton.
15 unit cartons or 15 pivots per master shipping carton.
Supplied with all necessary accessories for wood or metal doors and frames, installation template and instruction sheet.