Templates:
 


CP81 (ANSI A8133)
Steel-Polished and Plated or Bonderized and Prime Coated for Painting.

CP21 (ANSI A2133)
Brass-Polished and Plated

CP51 (ANSI A5133)
Stainless Steel-Polished and Satin Finish

 

•For medium weight doors receiving low frequency service.

•Hole in bottom tip for easy pin removal.

•Attractive slim barrel with flush pins and plugs.

•3-1/2”, 4” available in square, 5/8” and 1/4” Radius Round Corners.

•For hospital type, add HT to suffix of part number.

•Not for use with door closer.

•All hinges are ANSI template.

 

GENERAL PRODUCT INFORMATION: PBB, Inc. template hinges are manufactured to close tolerances and meet all specifications and requirements set by the American National Standards Institute (ANSI).

OTHER SPECIFICATIONS:
Height of hinge:
3.50 (+.000/-.015) for 3-1/2” x 3-1/2”
4.00 (+.000/-.015) for 4” x 4”

Width:
3.50 ± .015 for 3-1/2” x 3-1/2”
4.00 ± .015 for 4” x 4”
HINGE SWAGING: A standard swaging of our standard weight full mortise hinge when closed to parallel position provides a 1/16” clearance between leaves.

MATERIAL GAUGE:
.123 ± .005 for 3-1/2” x 3-1/2”
.130 ± .005 for 4” x 4”		 Template screw hole locations for all 3-1/2” x 3-1/2” full mortise template butts are punched to commercial standard CS9-65.

3 1/2 ” STANDARD SCREW SIZE
4” STANDARD SCREW SIZE
FHMS - 10-24 x 1/2”
FHWS - 10 x 1”
FHMS - 12-24 x 1/2”
FHWS - 12 x 1-1/4”

PACKAGING INFORMATION:
One hinge per plastic bag, 3 hinges and 1 screw pack per unit carton.
16 unit cartons or 48 hinges per master shipping carton.
1 screw pack includes all machine screws (24), and 1/2 wood screws (12). ATMS & AWS also available.
For 3-1/2 x 3-1/2, 1 screw pack includes (18) machine screws and (18) wood screws.