Templates:

 


PB81 (ANSI A8133)
Steel-Polished and Plated or Bonderized and Prime Coated for Painting.

PB21 (ANSI A2133)
Brass-Polished and Plated

PB51 (ANSI A5133)
Stainless Steel-Polished and Satin Finish


•For use on medium weight doors or doors requiring low frequency service.

•Not for use with door closers.

•For hospital type, add HT to suffix of part number.

•3", 3-1/2”, 4” available in square, 5/8” and 1/4” Radius Round Corners.

•All hinges are ANSI template.


GENERAL PRODUCT INFORMATION: PBB, Inc. template hinges are manufactured to close tolerances and meet all specifications and requirements set by the American National Standards Institute (ANSI).

OTHER SPECIFICATIONS:
Height of hinge:
3.00 (+.000/-.015) for 3" x 3"
3.50 (+.000/-.015) for 3-1/2” x 3-1/2”
4.00 (+.000/-.015) for 4” x 4”

Width:
3.00 ± .015 for 3" x 3"
3.50 ± .015 for 3-1/2” x 3-1/2”
4.00 ± .015 for 4” x 4”

HINGE SWAGING: A standard swaging of our standard weight full mortise hinge when closed to parallel position provides a 1/16” clearance between leaves.
MATERIAL GAUGE:
.092 ± .005 for 3" x 3"
.123 ± .005 for 3-1/2” x 3-1/2”
.130 ± .005 for 4” x 4”
Template screw hole locations for all 3-1/2 x 3-1/2 Full Mortise Template butts are punched to Commercial Standard CS9-65.

3" and 3-1/2” STANDARD SCREW SIZE
4” STANDARD SCREW SIZE
FHMS - 10-24 x 1/2”
FHWS - 10 x 1”
FHMS - 12-24 x 1/2”
FHWS - 12 x 1-1/4”

PACKAGING INFORMATION:
One hinge per plastic bag, 3 hinges and 1 screw pack per unit carton.
16 unit cartons or 48 hinges per master shipping carton.
1 screw pack includes all machine screws (24), and 1/2 wood screws (12). ATMS & AWS also available.
For 3-1/2 x 3-1/2, 1 screw pack includes (18) machine screws and (18) wood screws.
*Non-Template