Templates:
 


WTBB81 (ANSI A8112)
Steel-Polished and Plated or Bonderized and Prime Coated for Painting.

WTBB21 (ANSI A2112)
Brass-Polished and Plated

WTBB51 (ANSI A5112)
Stainless Steel-Polished and Satin Finish

•For use on medium weight doors requiring average frequency service.

•For use where doors must clear molding or protrusion, positioning the door out further, when open.

•Not for use with door closer.

•For hospital type, add HT to suffix of part number.

•All hinges are ANSI template.

GENERAL PRODUCT INFORMATION: PBB, Inc. template hinges are manufactured to close tolerances and meet all specifications and requirements set by the American National Standards Institute (ANSI).

OTHER SPECIFICATIONS:
Height of hinge:
4.00 (+.000/-.015) for 4”

Width:
4.50 ± .015 for 4” x 4-1/2”
5.00 ± .015 for 4” x 5”
6.00 ± .015 for 4” x 6”
 
HINGE SWAGING: A standard swaging of our standard weight full mortise hinge when closed to parallel position provides a 3/32” clearance between leaves.

MATERIAL GAUGE:
.130 ± .005 for 4” x 4-1/2”, 5”, 6”

4” WIDE THROW STANDARD SCREW SIZE
FHMS - 12-24 x 1/2”
FHWS - 12 x 1-1/4”

ALL ITEMS ABOVE CAN BE MADE IN THREE OR FIVE KNUCKLE CONFIGURATION.

PACKAGING INFORMATION:
One hinge per plastic bag, 3 hinges and 1 screw pack per unit carton.
11 unit carton or 33 hinges per master shipping carton.
1 screw pack includes all machine screws (24), and 1/2 wood screws (12). ATMS & AWS also available.