BB81EL/CB81EL – Electric Ball Bearing Hinge
STANDARD WEIGHT:
4.0″ x 4.0″
4.5″ x 4.0″
5.0″ x 4.0″
5.0″ x 4.5″
5.0″ x 5.0″
GENERAL PRODUCT INFORMATION: PBB, Inc. template hinges are manufactured to close tolerances and meet all specifications and requirements set by the American National Standards Institute (ANSI).
CONCEALED ELECTRIC THROUGH-WIRE: Two, four, six, eight, and ten continuous electric conductors See specifications below. Full mortise ball bearing, standard weight.
NRP-NOT NECESSARY.
To order use symbol “EL” as suffix.
- Electric hinges allow electrical currents and signals to pass from jamb through the hinge into the door in an invisible manner.
- Available in ball bearing type only.
- All hinges are ANSI template.
HINGE SWAGING: A standard swaging of our standard weight full mortise hinge when closed to parallel position provides a 1/16” clearance between leaves.
BB81: Available Materials
BB81EL/CB81EL (ANSI A8112)
Steel-Polished and Plated or Bonderized and Prime Coated for Painting
BB21EL/CB21EL (ANSI A2112)
Brass-Polished and Plated
BB51EL/CB51EL (ANSI A5112)
Stainless Steel-Polished and Satin Finish
BB81: Product Specifications
.130 ± .005 for 4”
.134 ± .005 for 4-1/2”
.146 ± .005 for 5”
4.00 (+.000/-.015) for 4”
4.50 (+.000/-.015) for 4 1/2”
5.00 (+.000/-.015) for 5”
4.00 ± .015 for 4” x 4”, 4-1/2” x 4”, 5” x 4”
4.50 ± .015 for 4 1/2” x 4 1/2”, 5” x 4-1/2”
5.00 ± .015 for 5” x 5”
FHMS – 12-24 x 1/2”
FHWS – 12 x 1-1/4”
FHMS – 12-24 x 1/2”
FHWS – 12 x 1-1/4”
FHMS – 12-24 x 1/2”
FHWS – 12 x 1-1/4”
| ELECTRICAL SPECIFICATIONS – (Maximum Continuous) | |
| EL2 – 24 VAC/DC, | @ 3 amps, continuous, 8 amp surge |
| EL2+4 – 24 VAC/DC, | @ 3 amps, continuous, 8 amp surge 1 pr @ 1 amp, 1 pr @ .25 amps |
| EL4 – 24 VAC/DC, | 1 pr @ 1 amp, 1 pr @ .25 amps |
| EL6 – 24 VAC/DC, | 1 pr @ 1 amp, 2 pr @ .10 amps |
| We do not recommend splicing hinges containing 26 AWG wire (EL4, EL6) to any wire heavier than 18 AWG |
|
| EL8 – 24 VAC/DC, | 1 pr @ 1 amp, 3 pr @ .10 amps |
| EL10 – 24 VAC/DC, | 1 pr @ 1 amp, 4 pr @ .10 amps |
| We do not recommend splicing hinges containing 28 AWG wire (EL8, EL10) to any wire heavier than 20 AWG |
|
NOTE: PURCHASE ORDERS PLACED FOR ELECTRIC MODIFICATION ARE NON CANCELLABLE**
|
EL MODEL AVAILABLE
|
|
| EL2 Wire | Concealed electric through-wire. 2 PTFE coated 20 gauge high Amp |
| EL2+4 Wire | Concealed electric through-wire. 2 PTFE coated 20 gauge. 4 PTFE coated 28 gauge. |
| EL4 Wire | Concealed electric through-wire. 4 PTFE coated 28 gauge |
| EL6 Wire | Concealed electric through-wire. 6 PTFE coated 28 gauge |
| EL8 Wire | Concealed electric through-wire. 8 PTFE coated 28 gauge |
| EL10 Wire | Concealed electric through-wire. 10 PTFE coated 28 gauge |
ELECTRIC:
Gauges available: .130, .134, .146
Additional wire length may be purchased at additional cost. See pricebook for additional cost.
All electric hinge modifications are to be placed in the center hinge position. Any other locations will void warranty. For grout filled frames install PBB mortar box-Failure to install mortar box voids warranty.
PACKAGING INFORMATION
One hinge and 1 screw pack per unit carton.
1 screw pack includes all machine screws (8), and 1/2 wood screws (4). ATMS & AWS also available.