BB85I – 1/8″ Inset Flush Ball Bearing Pivot Hinge

Standard Weight: 4″ or 4.5″

PBB, Inc. template hinges are manufactured to close tolerances and meet all specifications and requirements set by the American National Standards Institute (ANSI).

A simple solution to the problem of loose screws, distorted hinge leaves, pulled open knuckles caused by heavy vibration, door slamming or excessive use.

The shock comes first to the reinforcing hinge and is transmitted to all bearing surfaces of the frame.

Handed
Non Reversible
2 Knuckles
Fixed Pin
All Pivots are Standard Template

NOTE: Specify left or right hand
Available Option: Leaves can be beveled for better appearance and easier cleaning.

BB85: Available Materials

BB85I
Steel-Polished and Plated or Bonderized and Prime Coated for Painting

BB55I
Stainless Steel-Polished and Satin Finish

BB85: Product Specifications

MATERIAL GAUGE:
.180 ± .005

WIDTH:
Width of hinges used on the door must be specified when ordering as follows:

• With 4” x 4”, 4 1/2” x 4” or 5” x 4” hinges
Specify: BB85I40 for steel, BB55I40 for stainless steel

• With 4 1/2” x 4 1/2”, 5” x 4 1/2”, or 6” x 4 1/2” hinges
Specify: BB85I45 for steel, BB55I45 for stainless steel

STANDARD SCREW SIZE
GROMMET NUT & OHMS – 1/4-20 x 2”
JACKNUT & OHMS – 1/4-20 x 1”
FHWS – 14 x 1-1/4”

PACKAGING INFORMATION:
One pivot per plastic bag, 1 pivot and 1 screw pack per unit carton.
15 unit cartons or 15 pivots per master shipping carton.
Supplied with all necessary accessories for wood or metal doors and frames, installation template and instruction sheet.