SA84 – Single Acting Hinge
Standard Weight: 6.0″ x 6.0″ or 7.0″ x 7.0″
PBB, Inc. template hinges are manufactured to close tolerances and meet all specifications and requirements set by the American National Standards Institute (ANSI).
SA-84 Series Maximum Door Sizes and Weights
It is advisable to use three hinges on a door. The center hinge should be installed as close as possible to the top hinge for maximum support. Hinge capacity decreases as door height decreases.
Request template from factory for door and frame clearance required.
Non Handed
DO NOT USE ON DOORS WITH HINGE EDGE BEVELED.
NOTE: Wind Conditions, excessive air pressure, use of gasket for smoke or sound protection may prevent door from latching.
- Single acting half surface spring hinge is designed to fit door 1 3/4’ to 2” max thickness.
- Door flange is designed to surface mount metal or wood doors.
- Permits doors to open in single direction and automatically return to the closed position.
- Pivot points do no align with standard full surface hinges.
HINGE SWAGING: A standard swaging of our standard weight full mortise hinge when closed to parallel position provides a 1/16” clearance between leaves.
SA84: Available Materials
SA-84 (ANSI K81071)
Steel – Polished and Plated or Bonderized and Prime Coated for Painting
Steel – Polished and Plated or Bonderized and Prime Coated for Painting
SA84 – 6.0″ x 6.0″ or 6.0″ x 7.0″: Product Specifications
MATERIAL GAUGE:
.100 ± .005 for 4”, 6”, 7”
.100 ± .005 for 4”, 6”, 7”
BARREL DIAMETER:
1.180
1.180
JAMB FLANGE:
6.00 for 6” x 6”
7.00 for 7” x 7”
6.00 for 6” x 6”
7.00 for 7” x 7”
DOOR FLANGE:
5.50 for 6” x 6”
7.00 for 7” x 7”
5.50 for 6” x 6”
7.00 for 7” x 7”
STANDARD SCREW SIZE
FHMS – 12-24 x 1/2”
FHWS – 12 x 1 1/2”
OHMS/NUT – 2” x 1/4-20
FHMS – 12-24 x 1/2”
FHWS – 12 x 1 1/2”
OHMS/NUT – 2” x 1/4-20
|
SERIES
|
2 Hinges
|
3 Hinges |
Door |
Door
Thickness |
||
|
Door
Weight Lbs. |
Door |
Door
Weight Lbs. |
Door
Width |
|||
|
SA-84 6″ x 6″
|
125
|
3′-0″
|
155
|
4′-0″
|
1 3/4″
|
7′-0″
|
|
SA-84 7″ x 7″
|
130
|
3′-6″
|
175
|
4′-0″
|
2″
|
7′-0″
|
PACKAGING INFORMATION:
One hinge per plastic bag, 2 hinges and 1 screw pack per unit carton.
8 unit carton or 24 hinges per master shipping carton.
1 screw pack includes all machine screws (28), and 1/2 wood screws (14). ATMS & AWS also available.
One hinge per plastic bag, 2 hinges and 1 screw pack per unit carton.
8 unit carton or 24 hinges per master shipping carton.
1 screw pack includes all machine screws (28), and 1/2 wood screws (14). ATMS & AWS also available.